We are dedicated to the production of quality products which meet or exceed expectations and achieve the highest level of customer satisfaction.
🇺🇸 Manufactured in the US
Products
- Turned & Polished
- Turned, Ground & Polished
- Drawn, Ground & Polished
- Drawn, Turned, Ground & Polished
Carbon and Alloy Products
- 1018
- 1045*
- 10v45 – 75K Yield Micro Alloy*
- 1045/50 ASTM A311 B*
- 1141
- 1144 A311 B*
- 4140/4142 Quenched & Tempered*
- 8620
- ASTM A 193 B7*
- ASTM A 434 BC*
Stainless Products
- 303*
- 304/304 L
- 316/316 L
- 410/416/420
- 431
- 17-4PH H-1150
- Indicates Stocking Grades
Material can be provided in any AISI grade.
Subject to mill minimums.
Grades Not Referenced – Please Inquire.
Standard Diameter Tolerances
| Size Range | Cold Drawn or Turned & Polished | Turned, Ground, & Polished |
|---|---|---|
Up to thru 1.500″ | .004 | .001 |
Over 1.500″ to 2.500″ | .005 | .0015 |
Over 2.500″ to 3″ | .006 | .002 |
Over 3″ to 4″ | .006 | 003 |
Over 4″ to 6″ | .007 | .004 |
- These tolerances are for carbon bars .25% to .55 carbon range.
- All tolerances are plus .000 minus the number shown on the chart.
- Tolerances on 1018 T&P bars are .001 less than the T&P tolerances shown.
- 1/2 Standard Tolerance is available on most items.
Typical Surface Finishes
- Rough Turned: 63 to 250 Ra
- Cold Drawn Bar: 32 to 63 (63 max) Ra
- Turned and Polished (T&P): 32 Ra max
- Drawn, Ground and Polished: 20 Ra max
- Turned, Ground and Polished (TG&P) or Drawn: 20 Ra max
Straightness
TG&P bars at point of production, .006/ft T.I.R. Max as checked on rollers over a dial indicator.
Capabilities
- 1/2″ to 6″ Rounds
- Lengths – 8 ft to 40 ft
- Chamfering
- De-Magnetizing
- Bundle Sawcutting up to 48′
Packaging
- Full Length Tubes
- Collars
- Paper Wrap
- Wooden Boxes
- Bundles